OMR Tikka Prefits are a true shouldered prefit, guaranteed to properly head space with factory spec Tikka rifles.
Please allow 2-4 weeks for shipping. If time is a factor, please call to confirm inventory.
- Other calibers available upon request
**If you have a trued Tikka action OMR prefits will not work, meaning if you have had any of the following work performed to your action: the bolt face trued, action body trued or lug work . OMR prefits will not work without needing a Gunsmith to check assembly and proper head space** additional chambering and or throat work may be required at owners expense.
OMR carbon fiber Prefit barrels are compatible for your Tikka T3/T3X, Tac A1 and Sako 85 S, 85 M, 85 L actions. Our barrels start with match grade stainless steel blank, and carbon fiber wrapped to our precision standards. Available in all Tikka factory calibers in lengths of 18" - 28". All of OMR's barrels have a magnum taper, which is 1” at the muzzle (Fits into all Sendero Contour stocks). Threaded for brake. Brake not included.
All OMR carbon fiber blanks start with 416R Stainless, match grade, button rifled, hand lapped, stress relived blank. Every blank goes through our rigorous inspection process for tolerances, craftsmanship and material imperfections. Match Grade bore must measure within .0005" of our standard diameter and groove cannot vary in diameter more than .0003" for the length of the barrel. Once a blank passes this inspection, only then will it get carbon wrapped using the same state of the art materials and techniques that are employed in the Aerospace industry. We do all this to ensure You, our Customer the lightest, most accurate carbon fiber barrels available on the market today.
Easy to install:
- Use an action specific wrench along with a quality barrel vise to install your OMR barrel.
- OMR recommends to torque our prefit barrels to 75-90ft/lbs.
- Use caliber specific Go/NoGo gauges after tightening the barrel nut to ensure proper headspace. Can be rented from www.4Drendtal.com
-
Once you have installed your new OMR barrel, it is recommended that you have the caliber engraved or stamped before use. OMR does not do this prior to shipping, because we have no idea where your barrel will time out and properly headspace.
Average weights of barrels:
7MM 24”, 5/8"-24TPI = 3lbs 0oz
7MM 24”, 9/16"-28TPI = 2lbs 12oz
300 WIN 24", 5/8"-24TPI = 2lbs 15oz
