Savage Prefit Carbon Fiber Barrels

Our Savage Prefit Barrels are custom built to your specifications.  All of OMR's barrels have a magnum taper, which is 1” at the muzzle (Fits into all Sendero Contour stocks) .  Choose your finished barrel length between 18”-28”, choose your finished muzzle threads between  1/2"-28, 9/16”-28, or 5/8”-24, finally choose which twist rate you prefer....anywhere from 1-7.5T to 1-10T, depending on your caliber.  

Savage prefit barrels require a Savage barrel nut (not included), but can be added to your barrel for $50.

All OMR carbon fiber blanks start with 416R Stainless, match grade, button rifled, hand lapped, stress relived  blank.  Every blank goes through our rigorous inspection process for tolerances, craftsmanship and material imperfections.  Match Grade bore must measure within .0005" of our standard diameter and groove cannot vary in diameter more than .0003" for the length of the barrel.  Once a blank passes this inspection, only then will it get carbon wrapped using the same state of the art materials and techniques that are employed in the Aerospace industry. We do all this to ensure You, our Customer the lightest, most accurate carbon fiber barrels available on the market today.

Easy to install:

• Use a 1 1/4" crows foot on torque wrench to achieve proper torque specs
• OMR recommends to torque our prefit barrels to 75-90ft/lbs.
• Use caliber specific Go/NoGo gauges before and after tightening the barrel nut to ensure proper headspace.  Can be rented from www.4Drendtal.com
• Once you have installed your new OMR barrel, it is recommended that you have the caliber engraved or stamped before use.  OMR does not do this prior to shipping, because we have no idea where your barrel will time out and properly headspace. 

Average weights of barrels:

.338 LAPUA L/S, 28” 5/8-24TPI = 3lbs 3oz