OMR Action Wrenches

$85.00

The OMR action wrench is manufactured by Professional gun, stock, barrel, rifle, parts manufacture Oregon Mountain Rifles Co. out of Billings Montana. We here at OMR have installed and removed 1000s of barrels over the past 10 years using our Action Wrench design. We are now making it available to the public for the first time in almost 10 years.

Guaranteed to be in stock and ships in 1-2 business days.

Description

The OMR action wrench is manufactured by professional gun, stock, barrel, rifle, parts manufacture, Oregon Mountain Rifles Co, out of Billings Montana. We here at OMR have installed and removed 1000s of barrels over the past 10 years using our action wrench design. We are now making it available to the public for the first time in almost 10 years.

The OMR action wrench was designed to provide a lifetime of use for the professional gun smith who installs a dozen of barrels a day, to the guy who just wants quality tools that work when he needs them.

The OMR action wrench will not break, it doesn’t come with a so called built in breaking point like other cheap wrench’s claim. OMR starts with  416 stainless bar stock which is then  inserted into our state of the art 4th axis mill to be precisely machined to .002” of an inch.

The OMR action wrench is like no other wrench on the market. OMR uses duel lug design which provides 2X the surface area support in the raceway which eliminates any chance of side torque while maximizing contact in the raceways & keeping the action wrench straight in the action at all times even under high torque, high stress situations.

Anyone who has ever tried to or had to remove a seized or stuck barrel knows that 75 ft/lbs is no where near enough strength to break a barrel loose. In fact most manufacturers including us here at OMR recommend 75-90 ft/lbs of torque on new installs. Why use a wrench that doesn’t meet manufacturer recommended specifications?

Instructions for use:
OMR advocates for safe gun practices
Make sure gun is unloaded
Remove bolt
OMR recommends removing your bolt stop release as well (simply pull pin, remove stop, make sure you get the spring as well)
Insert rear entry OMR action wrench fully before applying any force
Use 3/4” torque wrench or socket
Remember rightly tighty, lefty loosey. FYI you’re going left!
Be aware hard or seized barrels can take considerable force to be safely removed and sometimes cutting them off is the best course of action, YOU BE THE JUDGE.

Features:

  • Rear entry design
  • 3/4” socket
  • Duel lug design
  • Anti twist guarantee
  • Tikka wrench works on all T3/T3x actions
  • Remington 700 wrench works on both short & long actions, as well as 700 clones
  • Left or right hand action compatible
  • Chamfered edges to protect your action
  • Made in Montana, USA
  • Guaranteed to be in stock and ships in 1-2 business days.

This action wrench is extremely strong and if not properly used can and will damage your action. OMR is not responsible for damage to your action, rifle, barrel and or  parts due to miss use of this product.  OMR recommends using a qualified gun smith to preform all work. Use at own risk.

Additional information

Weight 1 lbs

Reviews

There are no reviews yet.

Be the first to review “OMR Action Wrenches”

Your email address will not be published. Required fields are marked *