Customize Your Rifle with Options
Customize Your Rifle with Options
Tikka T3X Barreled Actions come fully assembled and head spaced to SAAMI specs, utilizing OMR’s match grade carbon fiber prefit barrel. OMR guarantees 1/2 MOA with all our rifle builds.
Your Tikka T3X barreled action will come with the following items: OMR Carbon Fiber Tikka Prefit Barrel, factory trigger, factory bottom plastic, factory magazine, factory bolt stop release, factory bolt shroud, and factory action screws; Unless you choose to upgrade them with our custom parts and options.
BARREL BREAK-IN PROCEDURE:
The following procedure is recommended when breaking-in an Oregon Mountain Rifle Co barrel.
NOTE: Allow the barrel to cool to ambient temperature before shooting each series of break-in rounds to avoid unnecessary throat erosion. Do not shoot your rifle in succession until the barrel is too hot to touch with a bare hand. DO NOT USE MOLY COATED BULLETS DURING BREAK-IN.
BARREL MAINTENANCE:
Once the barrel is broken in, remember to clean your barrel after approximately every 75 to 150 rounds; depending on caliber & bullet load to keep accuracy optimal. A dirty bore is a primary cause of poor accuracy. You know your rifle best, so use your best judgment.
FIND OUR ENTIRE BARREL INSTALLATION, BREAK-IN PROCEDURES & MAINTENANCE INFORMATION HERE
EXAMPLE WEIGHT OF TIKKA BARRELED ACTION:
You can expect a lead time of 6-8 weeks for us to build your Tikka Barreled Action. This is subject to change due to caliber specific actions and barrels. Call or email us if you have questions, or for in-stock options.
All OMR custom barreled actions, ship free to your FFL of choice in the Continental US Only. If you are in Alaska or Hawaii, there may be an additional fee to ship your barreled action.
All barreled action sales are final, once the rifle has been shipped. Any barreled action canceled after your order is placed will be subject to a 30% restocking fee. If for any reason there is a problem with performance we will work with you to remedy any problems that may arise.
OMR TIKKA BOTTOM METAL:
Replaces the factory bottom plastic. Available in standard or skeletonized options. Guaranteed to work with factory Tikka mags. Some after market mags may require smith work to function properly. Will NOT accept ACIS mags.
OMR SELF TIMING MUZZLE BRAKE:
OMR Self Timing Muzzle Brakes, available in Titanium or Stainless Steel, have been engineered to provide the greatest recoil reduction of any brake on the market. OMR Self Timing Brakes are a great addition to your setup when wanting to remove your brake for use at the range, hunting or suppressor use. OMR Self Timing Brakes can be easily removed & installed at home. Made of Grade 5 Titanium or 416 stainless steel. Brakes are caliber specific and ready for install.
OMR BOLT HANDLE WITH KNOB:
Knobs are available in either a skeletonized ultra light or carbon fiber option. Ambidextrous, fits left or right handed rifles. Handle made of 416 Stainless Steel. Coated in Black Nitride. 5/16″ x 24 TPI thread to accept most bolt knobs.
OMR BOLT FLUTING:
Give your rifle a custom look and feel with OMR’s bolt fluting service. Bolt fluting is not about weight savings. This is purely cosmetic and personalizes your rifle to you.
CUSTOM CERAKOTE:
Cerakote is a special coating that is applied to firearms that helps to protect it and increase its durability. This ceramic based finish is applied and helps to increase the material’s corrosion resistance, wear resistance, strength, and overall hardness. Cerakote helps you protect your investment.
$1,599.00
ON AVERAGE, YOU CAN EXPECT A 6-8 WEEK BUILD TIME
*FREE SHIPPING TO YOUR FFL*
Share
